DR. Fixit Super Latex ดร.ฟิคสิท ซูปเปอร์ ลาเท็ค

• Repair Structural Concrete
• Waterproofing
• Bonding agent
• As a bond coat
• Fixing or re-fixing of slip bricks, tiles, stones & marble bedding.
• Weatherproof & frost resistant render, high wear & erosion resistant render.

• Clean yhe surface with wire brush or scrubber to remove hidden dirt, loose particles, laitance & dust. Degrease the surface by using suitable solvents.
• Repair the concrete spalled portion by saw, cutting the extreme edges of the repair  location to a depth of at least 10 mm to avoid featheredging & to provide strong substrate.
• Clean the concrete surface to remove any contamination where breaking is not possible. Roughen the surface by light scrabbling or grit blasting.
• Expose corroded rebar in the repairing area fully. Remove all loose scales & corrosion deposits and immediately clean the surface.

• For priming of steel surface, apply one coat of Dr.Fixit Super Latex to all exposed reinforcement area & allow it to dry before second coat application.
• For priming of concrete substrate, the surface should be thoroughly saturated with potable water. Remove any excess of water prior to application ratio. Slowly mix cement with binder to obtain a smooth consistency. Continue mixing the slurry, during application to prevent settlement.

• Apply Dr.Fixit super Latex to prpare substrate by brush at rate 4-5 m per ltr.
• After applied wait until Dr.Fixit Super Latex form tacky, then applied other cementitious application.

• A forced action mixer is essential (PAN Miser) & recommended to ensure that Dr.Fixit Super Latex motar is thoroughly mixer at slow speed of 400-500 rpm.
• Hand mixing is permissble only for 25 kg or less quantity.
• Charge the mixer with required quantity of clean & dry sand, cement & mix for 1-2 minutes, then add Dr.Fixit Super Latex as per the doses recommended Mix for 2-3 minutes to avoid air entrapment. Keep on slowly adding water until the required consistency is achieved. Do not add extra water.

• Wide range of mix designs are recommended for different application using Dr.Fixit Super Latex

• Do not add extra water or more than recommended dosage.
• Recommended dosage to be followed to achieve desired results.

• Shelf life is 12 months from the date of manufacturing.
• Store in a cool & dry place in unopened condition (Precent from direct sunlight).

• Cementitious morths & slurrles modified with Dr.Fixit Super Latex when mixed or when become demp, may release alkali which can be harmful to skin & eye.
• Wear suitable protectve dothing, gloves, eye protection and respiratory protective equipment during application.
• In case of contact with skin, with eyes. rinse with plenty of clean water and then cleanse with soap water.

 *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***