DR. Fixit Bath Seal Grout ดร. ฟิคสิท บาธ ซีล เกราท์

• Easy to mix, add 1 ltr water to Dr.Fixit Bath Seal Grout
• Can be hand stir, free flowing, no segregation
• Non-Shrinking, no cracks
• Reduce gaps & cavities issues, easy to pour into formwork
• Chloride free, free of any other rust causing chemicals

• Pour grout to fill pores around sewer & sanitary ware pipes
• Grouting supporting structure foundations such as columns & concrete rebar
• reinforce walls
• Injection grouting for small structure repairs
• Concrete metal nut or fasteners

• Prepare container, mechanical mixer, clean water, wood for formwork, curing agent & adequate number of labourers.
• Calculate product consumption to estimate amount needed for application, should also consider potential lost product amount & prepare spares.

• Concrete surface must clean, strong, free of all loose dirty materials, dust free oil stain wax, liquid coating/paint, concrete curing agent, arent, grease or other stains that would affect waterproof coating adhesion.
• Formwork should be strong & well sealed to prevent Dr.Fixit Bath Seal Grout from leaking.
• Wash both the surface & formwork with water and saturate. Prior to application surface must be moist with no standing water, clean standing water prior to grouting.

• Open Dr.Fixit Bath Seal Grout 4 kg can lid & gently pour 1 ltr clean water into can.
• To stir mix manually with Pho Leaf trowel or mechanical mixer at low speed for 2 to minutes until homogenous paste is form.
• For gravel added mix, add gravel to mix after homogenous paste of Dr.Fixit Bath Swal Grout & clean water is form. Mix gravel with paste continuously for 5 minutes approximately.
• Note: product after mixing has 10 minutes pot life. Do not add more water into mix or sace remaining mix to be reuse for later.

• Bring mixed grout and pour into formwork if necessary build a Header Box 15 to 20 cm, try to watch out & prevent air bubble forming on grout.

• After application, maintain surface moisture. Saturate surface with water or curing & wait 3 days. Prevent surface vibration or temperature reaching high cold or hot temperature.

• Tools & equipment after application sould be clean immediately with water.

• After mixing do not add more water.
• Check formwork for no water leaks.
• Saturate surface to moist surface for 24 hours prior to applying  Dr.Fixit Bath Seal Grout. Surface areas depth deeper than 7.5 cm, 3/8 inch gravel can be added with weight not exceeding 40% Dr.Fixit Bath Seal Grout weight.
• Avoid applying in areas of high temperature.
• Not recommend for applying under steel sheet base.

• Dr.Fixit Bath Seal Grout one 4 kg can after mixing gain approximately 3.75 ltr

• Store 1 year in sealed container on shade dry area

• Wear gloves & goggle while applying product
• If body or eye contact, rinse with clean water immediately
• If ingest seek medical assistant immediately do not vomit Dr.Fixit Bath Swal Grout

 *** ถ้ามีจำนวนขอราคาพิเศษ ติดต่อเราได้เลย ***