DR. Fixit Gap Seal Tape ดร.ฟิคสิท แกป ซีล เทป

• Excellent waterproofing property
• Easy to use, self adhesive
• Excellent bond to multi substrate
• High Elastomeric, Tensile strength
• Resistance and reflect to UV
• Economically

Area of Application :

• Replacement or repair of flashing
• Guttering, down pipes. Sky lights
• Extensions, porches. Window frames & chimneys
• Caravans & Conservatories
• Sealing parapets, Valley gutters
• Seals capping bolts & roof ridges
• Roof repair of portable buildings
• Sealing leakage crack
• Excellent bond to Metal, Roof Tile, Concrete etc.
• Sealing leakage joint.

• The substrate must be clean and free of dust or other loose materials.

• Make sure the surface smooth, clean, no dust or other loose material
• Cut the flash band to required length
• Remove the release paper. Press flash band into place, using fingertip pressure. Avoid excessive pressure
• When laying adjacent rolls the flash band must overlap by at least 25 mm
• Use a steam roller or rounded piece of wood to smooth the flash band and ensure good contact is made
• Overpinting :
• Flash band can be overpainted with conventional decorative paints, though a little staining may occur at the edges.

• In cold weather , application will be made by warming the surface and by storing flashing band in a warm place prior to use. Do not apply if surface temperature is below 5 °C

• Roll 10 cm x 1m
• Rpll 10 cm x 3m
• Roll 20 cm x 3m
• Roll 30 cm x 3m
• Roll 30 cm x 10m
• Roll 30 cm x 10m (Black Foil)
• etc

• Shelf life is 12 months from the date of manufacturing.
• Stored in cool and dry place

• As with all bitumen products caution shiuld always be exercised. Protective clothing such as aloves and goggles should be worn. Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed, do not induce vomiting, but call for medical assistance immediately.